Skip to Content
Remote Shut-Off Valve

Shut off. Turn on.
From the office.

A five-position valve at the meter, run through the Tesla Duo endpoint and Tesla MDM. Disconnect, reconnect or reduce flow without a truck roll.

5 PositionsNSF/ANSI 61 Lead-FreeIP681/2 – 1 in
ONE CLICK. NO TRUCK. Tesla MDM Tesla DuoMulti-Network endpoint Shut-Off Valveat the meter OPENREDUCED FLOWCLOSED Disconnect, reconnect or reduce flow from the office.
5
valve positions
0
truck rolls to disconnect or reconnect
1–2 gpm
trickle-flow option at 60 psi
150 psi
max operating pressure
The math

Every manual shut-off is two trips.

One truck to turn it off. Another to turn it back on.

$50–$75
industry cost of one truck roll
2
trips per disconnect and reconnect
$100–$150
cost of every manual cycle

Start with your repeat accounts. The ones you cycle every month or quarter pay back fastest.

Truck roll cost: WaterWorld, "Remote Disconnect Metering."

More than on and off

Five positions.

POSITION 1
OpenNormal service.
POSITION 2
Reduced 1Trickle flow, about 1–2 gpm at 60 psi. Water for basic needs, not full service.
POSITION 3
Reduced 2Custom flow for conservation rules.
POSITION 4
Reduced 3Custom flow for your own programs.
POSITION 5
ClosedFull disconnect.
What it's for

Fewer trips. More control.

Collect what is owedDisconnect on schedule. Restore the same day the account is paid.
Move-ins and move-outsHandle service changes from the office, not a crew route.
Stop the leakShut off a running leak at a vacant or seasonal property.
Freeze and emergencyClose a service fast when a line breaks.
ConservationHold an account to reduced flow during restrictions.
Safer crewsNo door-side disconnects. Fewer miles, less overtime.
How it works

Three steps.

1
Set the valve

Swivel nut mounts directly to the meter. Set it during a meter change.

2
Plug into the Duo

The Tesla Duo has a second port for the valve, next to the encoder.

3
Click in Tesla MDM

Open, close or reduce flow from the office.

Built for the pit

The details.

Brass bodyStainless steel ball. NSF/ANSI 61, lead-free.
1/2, 3/4 and 1 inMale and female swivel nut. Fits 5/8 through 1 in meters.
IP68Rated for submersion in a flooded pit.
−22 to 140 °FOperating temperature. 150 psi max.
20-year battery design3.6 V lithium, based on two position changes a month.
Serviceable actuatorReplace the controller without cutting out the valve. Set the body now, add control later.
Questions

Shut-off valve FAQ.

How does the remote shut-off valve work?

The valve installs at the meter and connects to the second port on a Tesla Duo endpoint. Your office sends open, close or reduced-flow commands from Tesla MDM, and the Duo carries them over the Multi-Network.

Can I reduce flow instead of shutting water off?

Yes. The valve has five positions: open, closed and three reduced-flow settings. Reduced 1 is a trickle of about 1 to 2 gpm at 60 psi for utilities that do not want a full disconnect.

Will it fit my existing meters?

Yes. Valves come in 1/2, 3/4 and 1 inch with a male and female swivel nut that mounts directly to the meter, covering 5/8 through 1 inch residential meters.

Can I install the valve now and add control later?

Yes. The actuator services separately from the valve body, so you can set the valve body during a meter change and add the controller when you need it.

Cut the truck rolls.
Keep the revenue.