Skip to Content
Mueller Systems customers · November 2026

Mueller Systems Is Exiting Metering: What Mi.Net Utilities Should Know Before the ZENNER Transition

Mueller Water Products is handing its Mueller Systems metering customers to ZENNER USA. Before your utility signs up for replacement hardware, it is worth asking whether you want another battery-powered mesh network.

What happened

On November 4, 2026, Mueller Water Products announced an agreement to transition the metering business of its Mueller Systems subsidiary to ZENNER USA, part of the Minol-ZENNER Group. Mueller is exiting metering; ZENNER USA will provide replacement hardware and software to meet existing customer commitments [1][2].

Mueller said the exit followed a review of the metering business’s performance and place in its portfolio. On its fourth-quarter call the company reported roughly $40 million of 2026 metering-related sales at a negative adjusted EBITDA margin [1][3].

From one mesh to another

Mueller’s Mi.Net system was introduced as a wireless fixed network with a two-way mesh configuration [4], operating in the unlicensed 900 MHz band, and Mueller later added LoRaWAN and cellular options. ZENNER USA markets a battery-powered fixed mesh network for its Stealth Reader units, in which every meter acts as a repeater [5]. ZENNER also operates LoRaWAN networks.

Mesh earned its reputation in line-powered electric metering. In water, every endpoint runs on a battery that is never recharged, and every relay, retry and reroute spends it. Our white paper Mesh or Mess? lays out the physics: roughly 50% throughput loss per hop, meter-pit RF loss under metal lids and wet soil, and silent clusters of non-reporting meters when relays fail.

A forced transition is a chance to choose. You have to replace something either way. Make it the architecture you would pick if you were starting fresh, not just the one you are being handed.

Questions to ask before you migrate

  • How does relaying for neighbors affect endpoint battery life in our read interval?
  • What is the maximum hop count, and what read success do you guarantee at it?
  • When endpoints stop reporting, how does the head-end tell a dead endpoint from an orphaned one?
  • Licensed or unlicensed spectrum, and who protects us from interference?
  • What replaces each endpoint at battery end of life, and at what cost?
  • How does our historical read and billing data move with us?

Keep your Mueller meters reading while you decide

You should not have to rip out a working system on someone else's timeline. RG3 works with Mi.Net utilities to keep their existing Mueller meter data flowing into one place, Tesla MDM, right alongside new RG3 meters. Your billing and customer service keep running on one screen, and you replace meters as budgets and schedules allow instead of all at once.

  • No forced, all-at-once hardware swap
  • Your read history comes with you
  • One platform for old and new meters during the transition
  • New meters on a network where endpoints don't relay for their neighbors: FCC-licensed 450 MHz fixed network or cellular

Every Mi.Net system is set up a little differently. Call us for a free transition review, and we'll tell you exactly what we can carry over for your utility.

Frequently asked questions

What is happening to Mueller Systems?

On November 4, 2026, Mueller Water Products announced an agreement to transition its Mueller Systems metering business to ZENNER USA, part of the Minol-ZENNER Group. Mueller is exiting metering, and ZENNER USA will provide replacement hardware and software to existing Mueller Systems customers.

Why did Mueller exit the metering business?

Mueller said the decision followed a review of the metering business's performance and its place in the portfolio. On its earnings call it reported roughly $40 million of 2026 metering-related sales at a negative adjusted EBITDA margin.

Is Mueller Mi.Net a mesh network?

Mi.Net was introduced as a wireless fixed network with a two-way mesh configuration, and Mueller described its AMI as a mesh system built on a licensed wireless-mesh patent portfolio. Mueller later added LoRaWAN and cellular endpoint options.

Does ZENNER use a mesh network?

ZENNER USA markets a battery-powered fixed mesh network for its Stealth Reader meter interface units, in which every meter acts as a repeater. ZENNER also operates LoRaWAN networks.

What should Mi.Net utilities ask before moving to ZENNER?

Ask how relaying for neighbors affects endpoint battery life, how many hops a read may take, how the head-end tells a dead endpoint from an orphaned one, whether the network runs on licensed or unlicensed spectrum, what replaces the endpoints at battery end of life and at what cost, and how your historical data moves with you.

Can a utility read Mueller endpoints during a transition to another system?

Yes. RG3 works with Mi.Net utilities to keep existing Mueller meter data flowing into Tesla MDM alongside new RG3 meters, so the utility can replace meters at its own pace. Contact RG3 for a free transition review of your system.

Sources

  1. Smart Water Magazine, Mueller Water Products to exit metering business under ZENNER USA deal (Nov 2026)
  2. Minol-ZENNER Group press release, ZENNER USA reaches agreement with Mueller Water Products (Nov 5, 2026)
  3. Mueller Water Products Q4 2026 earnings call transcript
  4. WWD, Mueller Systems and Hersey Meters introduce AMI tool (Mi.Net two-way mesh)
  5. LoRa Alliance, ZENNER Stealth Reader Meter Interface Unit data sheet (fixed mesh network)

Published by RG3 Meter Company, a water meter and AMI manufacturer. Mueller, Mi.Net and ZENNER are trademarks of their respective owners; product descriptions are drawn from the companies’ own published materials and announcements.